Custom Metal Stamping Parts
Custom metal stamping parts manufactured to customer drawings from strip and blank stock, covering progressive, compound and single-operation stamping with dimensional and surface inspection before despatch.
- CategoryStamping Parts
- Quotation on drawing & quantityCUSTOM-METAL-STAMPING-PARTS-RFQ
Price and lead time are quoted per configuration and quantity. Send us your part or capacity requirement and we will come back with a quotation.
Custom Metal Stamping Parts
We produce custom metal stamping parts to customer drawings, covering progressive-die, compound-die and single-operation stamping for prototype, small-batch and volume programmes. Components are formed from strip and blank stock and finished to the dimensional and surface requirements agreed at the enquiry stage.
Materials and Tooling Selection
Material grade, thickness and temper are selected against the drawing and the intended service conditions. The table below gives typical reference ranges for the materials we press most often. Final material and surface finish are confirmed on enquiry.
| Material / Option | Typical Thickness | Typical Application |
|---|---|---|
| Cold-rolled steel (SPCC / DC01) | 0.5–3.0 mm | Brackets, covers, general pressings |
| Hot-rolled / pickled steel (SPHC) | 1.0–6.0 mm | Heavier structural pressings |
| Stainless steel 304 / 316 | 0.5–3.0 mm | Corrosion-resistant components |
| Aluminium 5052 / 6061 | 0.8–4.0 mm | Lightweight housings and panels |
| Copper / brass strip | 0.3–2.5 mm | Contacts, terminals, conductive parts |
| Surface finish: zinc plating, nickel plating, powder coating, passivation | — | Corrosion protection and appearance |
Process Steps and Inspection
Tooling is proven on first-off samples before volume running, and each production lot is checked against the agreed control plan. Dimensional checks, burr control and surface condition are verified through the run, with inspection records issued on request.
Drawing, Tooling and Delivery Flow
Enquiries are handled from drawing or sample: we review material, tolerances and quantities, confirm the tooling approach, quote, then produce to the agreed specification. Prototype, pilot and volume quantities can be scheduled to suit the customer programme.
Typical lead times and packaging are quoted per project. Final configuration and quotation are to be confirmed on enquiry.
Need a Different Configuration?
Tell us the parts you machine and the batch size — we will recommend a machine or process that fits.